English |       
 Product Category
Optical Transceivers
RF Optical Transceiver
100G CFP/QSFP28 Module
40G/56G QSFP+ Module
10G SFP+ Module
10G XFP Module
10G XENPARK/X2 Module
150M~4.25G SFP Module
Direct Attached Cables
25G SFP+ /100G QSFP28
HDMI/USB 3.0 AOC
120G CXP DAC/AOC
40G QSFP+ DAC/AOC
10G SFP+&XFP DAC/AOC
6G/12G Mini SAS Cables
Thunderbolt Cables
MPO/MTP Cable Accessories
Fiber Optic Cables
Passive Products
Fiber Channel HBA
CWDM/DWDM/CCWDM
PLC Splitters
1000M/10G Media Converter
GEPON OLT/ONU Device
EOC Device
 
40G QSFP+ SR4 Transceiver
Product Name: 40G QSFP+ SR4 Transceiver
P/N: WQS-MPO400-SR4C
Download Datasheet
P/N Data Rate Distance LD PD DDMI
WQS-MPO400-CSR4C 40Gbps 300m 850VSCEL PIN (Y)
WQS-MPO400-SR4C 40Gbps 150m 850VSCEL PIN (Y)

 

 

 

 

Features
4 channels full-duplex transceiver modules            
Transmission data rate up to 10.5Gbps per channel 
4 channels 850nm VCSEL array
4 channels PIN photo detector array
Low power consumption <1.5W
Hot Pluggable QSFP form factor
Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
Single MPO connector receptacle
Built-in digital diagnostic functions
Operating case temperature 0C to +70C
3.3V power supply voltage
RoHS 6 compliant(lead free)
 
Applications
40GBASE-SR4 40G Ethernet
Datacom/Telecom switch & router connections
Data Aggregation and Backplane Applications
Proprietary Protocol and Density Applications
Infiniband transmission at 4ch SDR, DDR and QDR
 
Description
The Wiitek Technologies WQS-MP400-SR4C is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber.        
These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates Wiitek Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Copyright Right © 2007-2014 Wiitek.com--Mini SAS,SFP+,XFP,XENPAK,X2,QSFP+,CXP
Address:3F~4F, 4th Block, Masha High-Tech Industrial Area, Pingdi Town, Longgang District,Shenzhen City, Guangdong Province, China
Admin