English | 中文      
 产品分类
光收发模块
100G CFP模块
40G/56G QSFP+模块
10G SFP+模块
10G XFP模块
10G XENPARK/X2模块
150M~4.25G SFP模块
直互连线缆
120G CXP高速铜缆/光缆
40G/56G QSFP+铜缆/光缆
10G SFP+高速铜缆/光缆
6G/12G Mini SAS线材
Thunderbolt雷电线材
MPO/MTP数据中心光缆
光纤跳线
光无源产品
WDM/CCWDM波分复用器
PLC分路器
10G光电交换机
GEPON OLT/ONU设备
EOC 设备
 
10G DWDM XFP光收发模块
产品名称:10G DWDM XFP光收发模块
产品型号:WBX-XXXX192-XXC
图面下载

威晟光电提供种类齐全的密集波分复用10G XFP光模块,提供C波段,每个波道间隔100G. 提供40CH, 应用于10G bps的SONET/SDH和10 gigabit Ethernet, 最大距离覆盖到80公里。

Features

Wavelength selectable to C-band ITU-T grid wavelengths            
Suitable for use in 100GHz channel spacing DWDM systems
XFP MSA Rev 4.5 Compliant
Data rate from 9.95Gbps to 11.1Gbps
No Reference Clock required
Cooled EML and APD receiver
Maximum link length up to 80km (1600ps/nm@G652 fiber)
Power Dissipation 3.5W Maximum
XFI and lineside loopback Mode Supported
-5ºC to 70ºC Operating Case Temperature
Diagnostic Performance Monitoring of module temperature,
Supply Voltages, laser bias current, transmit optical power, and receive optical power
RoHS compliant (lead free)
 
Applications
SONET OC-192&SDH STM 64
10G Ethernet
80 km 10G Fiber Channel
DWDM Networks
 
Description
Wiitek DWDM XFP Transceiver exhibits excellent wavelength stability, supporting operation at 100GHz channel, cost effective module. It is designed for 10G DWDM SDH, 10GBASE-ZR and 10G Fiber- Channel applications.
The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Wiitek DWDM XFP transceiver provides an enhanced monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
版权所有 © 2007-2014 深圳市威晟光电技术有限公司
地址:广东省深圳市龙岗区麻沙高新产业园4栋3~4楼
后台管理